Why install a free float handguard? One of the main benefits to free-floating a DPMS LR-308 is an increase in accuracy from reduced variability in the barrel harmonics due to sling tension. The traditional LR-308 configuration has the sling mount attachment at the base of the front sight gas block, so moderate changes in sling.

What is the difference between an AR-10/LR-308?

The family of rifles generally referred to as 'AR-10's or 'AR-308's encompasses a variety of rifles from a variety of manufacturers. Although similar in appearance and function, different rifles may have different upper receiver designs with parts that may or may not be interchangeable. This situation makes shopping for a free float quad rail or handguard a bit complicated.

The DPMS free floating quad rail features 4 picatinny rails for mounting accessories. This handguard is constructed of aircraft aluminum with a mil-spec hard coat anodized finish. This handguard is designed to match the Low-Profile LR-308 receivers, which are generally the A3-style uppers.
AR-10 style rifles have a few different commonly used barrel nut designs (the attachment point for a free float handguard), each of which is compatible only with a free float quad rail or handguard built specifically for that design. The two most common standards are for the original AR-10 and for the DPMS LR-308. Both of these standards are now used by a number of different manufacturers.Armalite AR-10 Style Handguards.
DPMS Low Profile LR.308 Free Float Handguard, 8.4' length $33.50. Presma® LR.308 M-LOK Series Slim Free Float Handguards, 16.5' DPMS Low Profile $117.99. 3 Piece Picatinny Rail Section Kit for M-LOK Style Slots, Silver Anodized $14.99. 3 Piece Picatinny Rail Section Kit for M.

AR-10 style rifles have a few different commonly used barrel nut designs (the attachment point for a free float handguard), each of which is compatible only with a free float quad rail or handguard built specifically for that design. The two most common standards are for the original AR-10 and for the DPMS LR-308. Both of these standards are now used by a number of different manufacturers.

Armalite AR-10 Style Handguards

The original AR-10 was developed in the 1950’s by ArmaLite, who still owns the AR-10 trademark and sells the only rifle officially called the AR-10. ArmaLite AR-10 rifles use their own proprietary barrel nut standard which is incompatible with most AR-10/308 derivative rifle models on the market. The thread specifications for the AR-10 barrel nut are 1-7/16” and 18 TPI-3A. Besides ArmaLite, some popular rifle models that have licensed and use this barrel nut design include the Eagle Arms AR-10 the Noveske N6. Handguards compatible with these rifles are offered by LaRue, PRI, Badger Ordinance and Daniel Defense among others.

DPMS LR-308 Style Handguards

Rifle maker DPMS would go on to develop their own AR-10 style rifle called the LR-308, with the same general design but with a number of parts incompatible across platforms including the barrel nut/handguard. The barrel nut standard based on the popular DPMS LR-308 has become the most widely adopted on the market. The thread specifications for the LR-308 barrel nut are 1-7/16” and 16 TPI-2A. Numerous manufacturers make rifles using the LR-308 barrel nut standard including the Remington R25 and the Bushmaster 308 ORC.

* Please note that while the barrel nut standard for the DPMS LR-308 rifles has remained the same, there are two different versions of DPMS upper receiver that differ in the height of the receiver rail. Upper receivers manufactured before August 2009 have a high profile receiver rail, while upper receivers manufactured after August 2009 have a low profile receiver rail. Handguards made for the low profile receiver will still fit the older receiver, but the top rail will not align evenly with the receiver top rail.

Monstrum Tactical carries low profile DPMS LR-308 pattern free float quad rails and keymod handguards in a variety of lengths at the lowest prices online. Each rail comes with a Lifetime Warranty. Click here to view our complete line of DPMS LR-308 rails.

DPMS GII Handguards

To confuse matters further, in 2014 DPMS released the DPMS GII 308 rifle. The DPMS GII is likewise, a DPMS made LR-308 rifle with an AR style design. However, the GII uses its own proprietary barrel nut standard. GII barrel nuts are not interchangeable with LR-308 barrel nuts.

Other Non-Standard/Proprietary Handguards

Besides these standards, several other manufacturers of AR-10 style rifles use their own non-standard or proprietary style of barrel nut including Ruger SR-762 and the Daniel Defense DD5 V1.

AR-10/AR-308/LR-308 Free Float Rail/Handguard Compatibility List

To confirm what type of handguard will fit on your AR-10/308 rifle please refer to our handguard compatibility list below. The list is not comprehensive. If you have any additions, questions or updates, please contact us. Before purchasing a handguard, we highly recommending confirming compatibility with your rifle manufacturer.

LR-308 Pattern Rifles COMPATIBLE with Monstrum Tactical Handguards:
BR308
DPMS Oracle .308
DPMS .308 Classic
DPMS LR-308L
DPMS TAC20
DPMS Long Range Lite
DPMS NATO REPR
DPMS Lite Hunter
DPMS Recon
DPMS Sportical
DPMS Compact Hunter
DPMS LR-308B
DPMS LRT-SASS
DPMS AP4
DPMS MK12
DPMS 3G1
DPMS LR-308T
Smith & Wesson M&P 10 Series
Bushmaster .308 ORC (low profile)
Remington R25 (low profile)
Palmetto State Arms PSA PA10
Palmetto State Arms PSA PAC Tac10

AR-10 Pattern Rifles NOT-COMPATIBLE with LR-308 Handguards:
ArmaLite AR-10 Rifles
Noveske N6
Eagle Arms AR-10

Non-Standard Rifles NOT-COMPATIBLE with LR-308 Handguards:
Aero Precision M5 (High Profile)
DPMS GII
Ruger SR-762 308
Rock River Arms LAR-8
LaRue Tactical OBR 7.62
LaRue Tactical PredatOBR 7.62
LaRue Tactical PredatAR 7.62
Daniel Defense DD5 V1
Sig Sauer 716 Patrol

Monstrum Tactical has the best prices on LR-308 Quad rails and Keymod Handguards, all backed with a Lifetime Warranty and our helpful customer service. Thank you for reading this article, if you have further questions regarding LR-308 Handguards please contact us for more help.

Picatinny Rail Section for M-LOK Style Mounts, 11 Slot

Picatinny Rail Section for M-LOK Style Mounts, 11 Slot.Easily add extra Picatinny slots to any M-LOK mount system for added accessories with these additional Picatinny rail sections. • Hex wrench included. • A6061-T6 Aluminum. • 11 slots, 4.65' length.

MSRP $6.19

not rated

Picatinny Rail Section for M-LOK Style Mounts, 13 Slot

Picatinny Rail Section for M-LOK Style Mounts, 13 Slot.Easily add extra Picatinny slots to any M-LOK mount system for added accessories with these additional Picatinny rail sections. • Hex wrench included. • A6061-T6 Aluminum. • 13 slots, 5.43' length.

MSRP $6.79

not rated

Picatinny Rail Section for M-LOK Style Mounts, 5 Slot

Picatinny Rail Section for M-LOK Style Mounts, 5 Slot.Easily add extra Picatinny slots to any M-LOK mount system for added accessories with these additional Picatinny rail sections. • Hex wrench included. • A6061-T6 Aluminum. • 5 slots, 2.28' length.

MSRP $4.49

Dpms Oracle 308 Free Float Handguard Installer

not rated

Picatinny Rail Section for M-LOK Style Mounts, 7 Slot

Picatinny Rail Section for M-LOK Style Mounts, 7 Slot.Easily add extra Picatinny slots to any M-LOK mount system for added accessories with these additional Picatinny rail sections. • Hex wrench included. • A6061-T6 Aluminum. • 7 slots, 3.07' length.

MSRP $4.99

not rated

Picatinny Rail Section for M-LOK Style Mounts, 9 Slot

Picatinny Rail Section for M-LOK Style Mounts, 9 Slot.Easily add extra Picatinny slots to any M-LOK mount system for added accessories with these additional Picatinny rail sections. • Hex wrench included. • A6061-T6 Aluminum. • 9 slots, 3.86' length.

MSRP $5.59

not rated

What is the difference between an AR-10/LR-308?

Armalite AR-10 Style Handguards

DPMS LR-308 Style Handguards

DPMS GII Handguards

Other Non-Standard/Proprietary Handguards

AR-10/AR-308/LR-308 Free Float Rail/Handguard Compatibility List

Picatinny Rail Section for M-LOK Style Mounts, 11 Slot

MSRP $6.19

Picatinny Rail Section for M-LOK Style Mounts, 13 Slot

MSRP $6.79

Picatinny Rail Section for M-LOK Style Mounts, 5 Slot

MSRP $4.49

Dpms Oracle 308 Free Float Handguard Installer

Picatinny Rail Section for M-LOK Style Mounts, 7 Slot

MSRP $4.99

Picatinny Rail Section for M-LOK Style Mounts, 9 Slot

MSRP $5.59

Presma® DPMS